Our Fit Kits are tried and tested! Old Man Mountain was born in 1996 from the need to mount racks on bikes without traditional mounting points and make every bike capable of doing more. Our Fit Kits do just that while having some key benefits over eyelet mounting too.
- Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame by moving the load from a small bolt that’s loaded in shear to a stud that extends from the axle and is captured by the rack dropouts.
- Need to carry more gear? Axle mounting increases our Divide rack’s load capacity to 70lbs/33kg.
- Want to move your rack between multiple bikes? Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts.?
Fit Kits contain all the parts to mount the rack to the front of a road or gravel bike with a 12 mm thru axle.
- SET705.R 12 mm thru axle with 120 to 125 mm length and 1.5 mm thread pitch
- SET706.R 12 x 125mm thru axle with 1.0 mm thread pitch
- SET712.R 12 x 122mm thru axle with 1.75 mm thread pitch
- SET723.R 12 x 135 mm thru axle with M12 x 1.0 mm thread pitch (and Spacers to reduce the length to 129 mm)
- SET724.R 12 x 134 mm thru axle with M12 x 1.5 mm thread pitch (and Spacers to reduce the length to 128 mm)
- SET724.X 12 x 134 mm thru axle with M12 x 1.5 mm thread pitch (Replacement Rudy Nut to allow the axle to pass through)
All kits include:
- A pair of mounting pucks, for bikes without upper eyelets.
- Ultra strong and UV stable Panduit Zip Ties
- Clear protective tape, for underneath the pucks and Zip Ties
- Mounting hardware
What others are saying
There are no contributions yet.