There isn’t much to say about these stems. They are a longtime favourite of ours because they do the job very well, come in a good range of sizes and are shiny silver.
The 25.4mm bar clamp diameter will fit most traditional flat, or mountain bike handlebars but if in doubt measure with a pair of vernier calipers first.
Note that more modern mtb bars are 31.8mm, so you might be wanting this stem instead.
The stem clamp is for a standard 1-1/8" steerer.
Elegant threadless 1 1/8″ stems that won’t look out of place on classic bikes.
A simple, polished, all-silver threadless stem with a 25.4 clamp diameter. It’s flippable to really dial in your fit. Available in 6 and 17 degree rise/drop in a variety of extension lengths. 4 bolt handlebar clamp. Length is measured center-to-center along extension.
Specs:
- Handlebar Clamp: 25.4mm
- Steerer Clamp: 1-1/8″
- Stack Height: 40mm
- Weight: 140g (100mm size)
Question
Mike –
What length and angle would you suggest for an all city Spacehorse with rando bars?
Photo has been removed
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Adam Macbeth –
Hi Mike, it’s not possible to answer this question without seeing your setup and you on the bike. Feel free to cruise past the shop and we can take a look otherwise chatting to a local store or bikefitter might be the best approach.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal
Question
Todd –
its 25.4 on the fork clamp what size is the bar clamp?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Mik Efford –
Hi Todd, no this stem is 25.4mm bar clamp diameter and standard 1-1/8″ fork/steerer clamp. Cheers, Mik
Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal